Multi-process: DC TIG /PULSE TIG /MMA
Easy pulse TIG: pulse frequency, pulse width, peak current, down-slope time
VRD function
Reliable design: soft start, multi protection: over current, over voltage, over heat etc
| TIG200 PRO | ||
| Rated input voltage/frequency (V/Hz) | 1 phase, AC230V±10%, 50 /60Hz | |
| Rated input capacity (KVA) | 7.5 | |
| Rated input current (A) | 34 | |
| Duty cycle (40℃) | 40%@200A (TIG) | |
| OCV (V) | 54 /9 (VRD) | |
| MMA | Output current range (A) | 20-160 |
| Arc force (A) | 50 | |
| Hot start (A) | 50~100 | |
| TIG | Output current range (A) | 10-200 |
| Pre-gas /post-gas (s) | 0.1-15 /0.1-15 | |
| Initial /final current (A) | 10-200 /10-200 | |
| Up-slope /down-slope time (s) | 0.1-10 /0.1-10 | |
| Base current (A) | 10-200 | |
| Pulse frequency (Hz) | 1-20 | |
| Pulse duty cycle | 35-75% | |
| Trigger mode | 2 /4T | |
| Arc ignition method | HF | |
| Protection class | IP21S | |
| Insulation class | F | |
| Dimension (mm) | 389*155*299 | |
| Weight (kg /lb) | 9.5 /21 | |
You can contact us by filling in the information below, the official service consultant will contact you within 12 hours, please keep the phone open. If you have any questions or suggestions, please fill in the following form, KEYONE will serve you wholeheartedly.
Provide technical consultation on welding and cutting technology, mechanical configuration, etc
Learn More
