This DC pulse argon arc welding machine has the functions of advanced gas supply, slow current rise, gas delay, and pulse welding.
All pulse parameters can be adjusted separately during pulse welding.
This welding machine uses high-frequency pulse arc ignition with a success rate of 100%.
It is especially suitable for automatic welding occasions and has excellent results in automatic welding of thin plates.
TIG-350Plus/400Plus/500Plus | |||
Model | TIG-350Plus | TIG-400Plus | TIG-500Plus |
Rated input voltage (V) | 3Ph 220V 60HZ | 3Ph 220V 60HZ | 3Ph 220V 60HZ |
Rated input capacity (KVA) | 11 | 18 | 20 |
Rated output current (A) | 315 | 400 | 500 |
Current adjustment range (A) | 5-315 | 10-400 | 10-500 |
No-load voltage (v) | 65 | ||
Arc ignition method | High frequency pulse | ||
Advance air supply time (S) | 0-5 | ||
Current ramp-up time (S) | 0-10 | ||
Current ramp-down time (S) | 0-10 | ||
Pulse duty cycle (%) | 1-99 | ||
Pulse frequency (HZ) | 1-200 | ||
Gas lag time (S) | 1.5-15 | ||
Machine cooling method | Air cooling | ||
Welding gun cooling method | Water cooling | ||
Weight(KG) | 32 | 37 | 45 |
VolumeMM³ | 550x220x420 |
You can contact us by filling in the information below, the official service consultant will contact you within 12 hours, please keep the phone open. If you have any questions or suggestions, please fill in the following form, KEYONE will serve you wholeheartedly.
Provide technical consultation on welding and cutting technology, mechanical configuration, etc
Learn More